FROM VISION TO UPTIME: DESIGN, COMMISSION, OPERATE - YOUR FULL-SPECTRUM DATA-CENTER PARTNER.

We source top talent, enforce rigorous inspection and quality‑control, and keep your infrastructure running flawlessly.

SERVICES

Electrical Power & Systems Design

We design reliable power systems from concept through IFC: single‑lines, load studies, grounding/bonding, lighting, and raceway/cable schedules. Our packages include short‑circuit, protection coordination, and arc‑flash analysis with clear labels and recommendations, using recognized methods to calculate arcing current and incident energy. We coordinate closely with controls, SCADA, and low‑voltage teams to ensure safe, maintainable installations.

Single‑line diagrams, panel schedules, and feeder/conduit sizing
Load calculations, voltage‑drop checks, and equipment ratings
Grounding/bonding design and lighting calculations
Short‑circuit and protective device coordination studies
Arc‑flash analysis, equipment labels, and PPE guidance
Settings recommendations (including use of instantaneous where appropriate to reduce incident energy)
Normal/emergency power distribution layouts and one‑line updates
Specifications, BOMs, details, and construction drawing set (IFC) with as‑builts

Electrical Control Panel Design And Assembly

We design clean, serviceable control panels and automation architectures

PLC/HMI standards, I/O allocation, enclosure layouts, schematics, and bills of materials

Then support build and test with clear procedures and as-builts. Panel construction aligns with industrial control panel requirements to help ensure proper marking, spacing, protection, and safe installation practices

Construction Management, Commissioning & Turnover

From pre-con through startup, we manage schedules, submittals, RFIs, change control, and field QA/QC. We prepare installation packages, coordinate inspections, and execute a documented commissioning plan with pre-functional checks and component/system testing before energization, maintaining clear records and closeout documentation for a smooth turnover.

Project execution plan, look-ahead schedules, budget tracking
Submittal/RFI/change-order management and document control
Site logistics, contractor coordination, and QA/QC checklists
Safety planning and job briefings for critical tasks
Commissioning plan, pre-functional checklists, and system tests prior to energization
Test records, punch lists, O&M manuals, training, as-builts, and warranty handoff
Final reports and recommendations for operational maintenance and future upgrades

SERVICES

Drafting Services

Our drafting services work on either new construction, design system, or we can finish the project drawing after the job is done, redline completion.

Mid-America Services offers electrical design and 2D electrical drafting services in a cost-effective manner. Our electrical designers ensure delivery of electrical control system design, one-line power schemes and electrical conduit design services for Industrial and commercial facilities.

We also efficiently cater to electrical site plan design services and low voltage system design services related to SCADA monitoring systems, PLC control systems and site cabling systems.

Industrial Consulting & Operations Enablement

We help owners and project teams make confident decisions and improve lifecycle performance. Services include feasibility and code/safety reviews, constructability and value engineering, owner’s‑rep support, commissioning strategy, and operations playbooks. We also develop practical electrical safety programs—risk assessments, LOTO/energized work permitting, arc‑flash labeling, AR PPE guidance, hearing protection within arc‑flash boundaries, and GFCI use for employee protection—aligned with recognized workplace electrical safety practices.

Feasibility studies, scope definition, and basis‑of‑design
Code/safety gap reviews and risk assessments; AR PPE and labeling guidance
LOTO procedures, energized work permits, job planning/briefing templates
Hearing protection requirements within arc‑flash boundaries; GFCI use policies for temporary power and maintenance work
Value engineering and constructability reviews with cost/schedule impacts
Owner’s‑rep services: procurement support, contractor evaluation, and change control
Commissioning strategy and test plan templates; turnover criteria and documentation roadmap
Reliability improvements: maintenance strategy, spare‑parts planning, and arc‑flash label updates
Power quality investigations, root‑cause failure analysis, and remediation plans
Project books: bid packages, specifications, drawings, vendor matrices, and O&M outlines

Preventive Maintenance, Testing & Electrical Safety Labeling

Keep your power system reliable and safe with planned inspections, testing, and clear labeling. We develop practical PM programs, perform condition-based testing, and update one‑lines, device settings, and arc‑flash labels. Your team gets actionable reports, prioritized corrective actions, and an electrical safety playbook that supports safer work practices and compliant signage/labeling for energized equipment

PM program setup and schedule (annual/interval-based)
IR thermography, breaker exercising, primary injection, and ground resistance testing
Load monitoring and power‑quality checks
Protective device setting sheets and one‑line updates
Arc‑flash analysis and equipment labeling with PPE guidance
LOTO procedures, energized work permitting, and field labeling standards
Test reports, deficiency punch lists, and remediation roadmap aligned to maintenance standards

collaboration

COLLABORATION

Communication is key! That's why our designers use our own state of the art custom-made, AI-enabled engineering software and SharePoint from Microsoft to store their drawings. We also use ZOHO to manage all project coloration items such as tasks, schedules, notes, issue tracking and overall progress for each project, as well as companywide progress tracking.

Using ZOHO allows our customers to see real time progress on the project. Some examples of this would be:

- Gantt Chart for project timeline.

- Living documents.

- Version Control on documents.

- Drawing archives

- More.......

ABOUT

For nearly 25 years, Mid‑America Services has delivered practical electrical engineering, control systems, and construction management for industrial and commercial facilities. Today we also support mission‑critical and data center projects, apply AI‑driven insights to speed reviews and improve reliability, and bring disciplined QA/QC and project management to every job—so designs are buildable, startups are smooth, and operations are safer and more dependable. We also support modular and containerized data‑center deployments alongside conventional builds.

Electrical power and systems design: single‑lines, studies, grounding/bonding, lighting, raceway/cable schedules, and construction packages.
Control panels and automation: PLC/HMI architecture, drawings, build support, FAT/SAT, and documentation.
Construction management and commissioning: schedules, submittals/RFIs, QA/QC, pre‑functional and functional testing, and turnover.
Data centers and critical facilities: power architecture, capacity planning, redundancy/coordination studies, commissioning, and modular/containerized deployments.
AI and data: design checks, schedule‑risk forecasting, power‑quality/anomaly detection, IR image triage for maintenance, and faster document control and as‑builts.
Quality control and safety: inspection/test plans, hold points, checklists, and job briefings aligned with recognized planning practices for electrical work.
Project management: owner’s‑rep support, procurement coordination, change control, budget visibility, and clear communication from concept to closeout.

ABOUT

TEAM

Meet the Team

Although this isn't a full list of MAS members, the below people are normally the first contact.

Ed W.

Owner / Design Engineer / Master Electrician / KS, CO, OK, TX

Past experiences –

Project Manager, Design Engineer

Consult and design electrical projects in all electrical aspects; medium voltage, power distribution, instrumentation, PLC controls / SCADA, low voltage and networking and communications.
Communication technician with the latest technologies with fiber optic, testing, jetting, and troubleshooting.
Experience in maintenance inspections for switchgear, breakers, contactors, etc.
Planned, directed, and managed large contracted electrical projects.
Design instrumentation and control systems for multiple interstate pipeline companies ranging from single MOV sites, to medium size pump stations as well as storage facilities.
Expertise in troubleshooting, configuring, and repairing instrumentation, plc, and relay control systems.
Designed and built power distribution systems ranging from 12kvac to 5vdc systems.
Operation Qualified (OQ Tested) (NCCER) for I&E Tech, Tech, and abnormal operations. Listed on ISNetWorld.
Practiced draftsman. AutoCAD versions range from R13 to 2017.
Write PLC programs for local protection of pipelines with SCADA status and commands.
In depth knowledge of mainline motors and their associated equipment.
Experienced with electrical compliance testing using a variety of meters, eg. Fall of potential ground test and polarization index (PI) testing, etc..
National Center for Construction Education and Research (NCCER) Certified Craft Instructor for Electrical.
Veriforce administrator and instructor.

Ashton N.

System Designer / Designer / Texas Tech

Past experiences - Project manager experience on smaller projects. Field experience which helped him develop “on-the-go” problem solving skills.

Currently we have Ashton designing and drawing many items such as details, ground, area classification, etc. He is also our go to guy with any state/local requirements for any design guidelines. Also works closely with clients to better understand any licenses and permits that may be required for projects.

Armando S.

Electrical Engineer / Florida International University

Past experiences –

BIM/Revit Coordinator, Electrical Revit Drafter, Electrician Apprentice
Designed drawings for BOM, Prefab, Trimble points, run schedules, field install, and shop drawings using Revit and AutoCAD MEP.
Designed electrical panel board loads and schedules and assigned receptacles and other loads to these panels.
Clash reports in Navisworks, coordinate with trades to address clashes how to best fix those clashes.
Created new Revit families according to the needs of the projects, edited families and added things like clearances for electrical panels, cable trays, light fixtures, etc.
Designed conduit layouts, device/lighting layout, panel schedules, riser diagrams, etc. using Revit and AutoCAD.

Currently Armando does all things related to electrical design and helps with sizing, specifying and recommending all things electrical. He also does heavy lifting when tasked with the more serious safety items. His background makes him the perfect person to be the “jack of all things” here at MAS.

Patrick P.

Design Engineer / Southeastern Oklahoma State University

Past experiences –

Over Sixteen years of successful background as an Electrical Designer, Field Services Technician/Electrical Engineering Support - Supervisor.
Extensive electrical repair/maintenance, system diagnosis, customer service and operations experience.
Adept in achieving compliance with industry/local codes standards and regulations.
Skilled in full-life-cycle automation, control, and instrumentation project implementation/management for major corporate clients.
Knowledgeable in design, commissioning, and start-up delivery in varied industries.
Skilled in interpreting blueprints & schematics, constructing, diagnosing & repairing circuits and diagnosing power supply problems.

Currently Patrick is a team lead on multiple projects where he not only directs, plans and communicates with other MAS guys as well as the customer and other engineering partners involving many aspects of the projects.

Mitch N.

Design Engineer / OSU-OKC / Master Electrician (24 States)

Past experiences –

Director of Operations, Chief Operations Officer, Project Manager
Executive Management, Vendor Evaluation & Selection, Stakeholder/Client Relations, Policy/Procedure/DoR Development, Budget Deve1opment/ Expense Control, Human Resources Management, Staff Training and Supervision Oversight, Markets Research & Development, Processes Optimization Across Multiple Platforms
Build strong client relations with current and prospective stakeholders.
Oversee estimation of all projects
Provide Subject Matter Expertise liaison as needed companywide.
Manage multiple projects from $500k to $60M nationwide.

Currently Mitch is a team lead that can work on many projects and does an excellent with overall design and also does a great job delegating tasks to the team. He works closely with all the small details that are required in a position like his. He works closely with other client engineers to ensure that MAS is as efficient as possible.